- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
9/64 (.1406) Solid Carbide, Straight Flute Series 1400 General Purpose Reamer
- Item Code: 14512
- Brand: Fullerton
- Unit Size: 1
Description
Fullerton Tool provides these straight flute, right hand cutting reamers based on common fractional, metric, wire and letter sizes. Fullerton Tool's 1400 reamers are known for tight tolerances, great quality and performance.
Features
Back To Top- Straight Flutes
- Number of Flutes Varies by Diameter
- Carbide Reamers
- Manufactured Using Female and Male Centers for Improved Concentricity
- Male centers on items up to .1124�� (2.86mm)
- 45� lead angle
- Short and standard lengths
- Standard Uncoated
- Metric and Inch Based Tools
- Cutter Diameter up to .250��: +0.0002�� -.0000�� / over: .2501��: +0.0003�� -.0000�� (or up to 6.35mm: +0.005mm -.000mm / over 6.351mm: +0.008mm -.000mm)
- Shank Diameter: +.0005�� -.0005�� (+.013mm -.013mm)
- Steel Shanks on Items over .2812�� Cutting Diameter and 4.000�� in Length
Tech Specs
Back To Top| Length Designator | SD |
|---|---|
| Overall Length Metric | 88.90 mm |
| Brand | Fullerton |
| Center Type | Female |
| Coolant Through | No |
| Length | Standard |
| Metric/Inch | Inch |
| Chamfer Angle (Degrees) | 45 |
| Decimal Diameter | 0.1406" |
| End Type Character Designation | C |
| Fractional Diameter | 9/64" |
| Metric Diameter | 3.57 mm |
| Number of Flutes | 4 |
| Point End Type | 45° Cutting Chamfer |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Weldon Flat | No |
| End Type | SE |
| Flute Length (Inch) | 7/8 |
| Overall Length Decimal | 3.5000" |
| Shank Diameter (Inch) | 1/8 |
| Shank Diameter (mm) | 3.18 |
| Flute Length (mm) | 22.23 |
| Material | Solid Carbide |
| Overall Length Fractional | 3-1/2" |
| Series | 1400 |
| Coating/Finish | None |
| Direction of Cut | RH |
| Flute Length (Decimal Inch) | 0.8750 |