- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
25mm Diameter Endmill, 25mm shank, 3 flutes, 38mm Length of Cut, 63 Reach (mm), with Coolant, HA Shank, 121mm Overal Length, 45° Helix Angle
- Item Code: 3367-25.000
- Brand: Guhring
- Unit Size: 1
Description
Slot and pocket milling often creates chip evacuation problems, especially on vertical machining centers. Re-cutting chips can cause end mill failure.
Coolant-through end millshelp evacuate chips from the cutting zone. This eliminates the problem or re-cutting chips.
Alumi-tech carbide end mills are designed specifically for milling aluminum and aluminum alloys. Suitable for slot and roughing applications, these tools are available in two and three flute designs, solid and coolant fed. Bright finished and Super-A™ coated standard product is available from stock.
Features
Back To Top- Radial coolant exit (64° angle) for optimal chip evacuation
- Radius geometry with continuous helix-radius-correction
- Reduced neck ground for collision reduction
Tech Specs
Back To Top| Overall Length (Decimal) | 4.764 |
|---|---|
| Reach (Decimal) | 2.4080 |
| Brand | Guhring |
| Helix Angle | 45° |
| Overall Length (mm) | 121 |
| Reach (mm) | 63 |
| Metric Diameter | 25.00 mm |
| Number of Flutes | 3 |
| Shank Diameter (mm) | 25 |
| Length of Cut (decimal) | 1.496 |
| Length of Cut (mm) | 38 |
| Decimal Diameter | 0.9843" |
| Series | 3367 |
| Shank Type | HA |
| Shank Diameter (Decimal) | 0.9843 |