- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
1/2 (.5000) 5-Flutes FC20 Coated Solid Dura-Carb Fantom 2.0 HP End Mill- .090CR
- Item Code: 37645
- Brand: Fullerton
- Unit Size: 1
Description
The 3412 Fantom 2.0 is one of Fullerton Tool's advanced performance, solid carbide, 5-flute end mills specifically designed to excel in difficult machining materials. Enhanced edge strength provides a stable, robust cutter that allows heavier chip loads and produces superior part finishes. The Fantom 2.0 is recommended for machining in Steels, Stainless Steels, Super Alloys and Titanium and is highly recommended by major aerospace companies for all titanium applications.
Features
Back To Top- Square and Corner Radius End
- 5 Individually Designed Flutes
- Eccentric Relief
- Variable Index
- Single End
- Right Hand Spiral
- Right Hand Cut
- Center Cutting
- Stub, Standard, Extra Long, and Long Reach Lengths
- Standard FC-20 Coating
- Metric and Inch Based Tools
- Dura Carb (Micrograin)
- Shank Diameter Tolerance: h6
- Cutter Diameter Tolerance: +.000" -.002" / +0.00 -0.05mm
Tech Specs
Back To Top| Radius Decimal | 0.0900" |
|---|---|
| Radius Decimal | 0.0900" |
| Coolant Through | No |
| Coolant Through | No |
| Decimal Cutting Diameter | 0.5000" |
| Decimal Cutting Diameter | 0.5000" |
| Direction of Cut | RH |
| Direction of Cut | RH |
| Overall Length (Inch) | 3 |
| Overall Length (Inch) | 3 |
| Series | 3412 |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Shank Diameter (Inch) | 1/2 |
| Shank Diameter (Inch) | 1/2 |
| Flute Spiral Direction | RH |
| Flute Spiral Direction | RH |
| Overall Length (mm) | 76.20 |
| Flute Length (mm) | 31.75 |
| Overall Length (mm) | 76.20 |
| Fractional Cutting Diameter | 1/2" |
| Length Designator | SD |
| End Type Character Designation | R |
| End Type Character Designation | R |
| Flute Length (Inch) | 1-1/4 |
| Flute Length (Inch) | 1-1/4 |
| Brand | Fullerton |
| Brand | Fullerton |
| Coating | FC20 |
| Coating | FC20 |
| End Type | SE |
| End Type | SE |
| Length | Standard |
| Length | Standard |
| Metric Cutting Diameter | 12.70 mm |
| Metric/Inch | Inch |
| Metric Cutting Diameter | 12.70 mm |
| Point End Type | Corner Radius |
| Point End Type | Corner Radius |
| Flute Length (Decimal Inch) | 1.2500 |
| Flute Length (Decimal Inch) | 1.2500 |
| Overall Length (Decimal Inch) | 3.0000 |
| Overall Length (Decimal Inch) | 3.0000 |
| Shank Diameter (mm) | 12.70 |
| Shank Diameter (mm) | 12.70 |
| Weldon Flat | No |
| Weldon Flat | No |
| Number of Flutes | 5 |
| Number of Flutes | 5 |
| Radius Metric | 2.29 mm |
| Radius Metric | 2.29 mm |