0.2500 in. (1/4) Cutter Diameter x 1.5000 in. (1-1/2) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 997116

0.3750 in. (3/8) Cutter Diameter x 1.5000 in. (1-1/2) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 997124

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.7500 in. (3/4) Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 65462-C3

0.0469 in. (3/64) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 54647-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0470 in. (3/64) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 23200-C3

0.0150 in. (1/64) Cutter Diameter x 0.0780 in. (5/64) Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Ball End Mill

Item Code: 940915

0.3750 in. (3/8) Cutter Diameter x 1.1250 in. (1-1/8) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 41324-C3

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 0.3750 in. (3/8) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 37916-C6

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut x 3 Deg. 0.6810 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 996635-C8

0.1250 in. (1/8) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 951208-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 4 Flute 9 Micrometer CVD Diamond Coated Carbide Ball End Mill

Item Code: 62062-HARVEY

0.1875 in. (3/16) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 220 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 22712-C3

0.0080 in. (.2 mm) Cutter Diameter x 0.0060 in. Length of Cut x 0.0120 in. Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 37808-C6

0.3750 in. (3/8) Cutter Diameter x 1.1250 in. (1-1/8) Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 49624-HARVEY

0.3125 in. (5/16) Cutter Diameter x 0.7500 in. (3/4) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 23220-HARVEY