0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.7500 in. (3/4) Length of Cut 2 Flute TiCN Coated Carbide Corner Radius Endmill

Item Code: TC65312

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.6250 in. (5/8) Length of Cut 2 Flute TiCN Coated Carbide Corner Radius Endmill

Item Code: TC64712

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut 2 Flute TiCN Coated Carbide Corner Radius Endmill

Item Code: TC62402

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.7500 in. (3/4) Length of Cut 3 Flute TiCN Coated Carbide Corner Radius Endmill

Item Code: TC66512

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.6250 in. (5/8) Length of Cut 3 Flute TiCN Coated Carbide Corner Radius Endmill

Item Code: TC65912

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut 3 Flute TiCN Coated Carbide Corner Radius Endmill

Item Code: TC63602

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.6250 in. (5/8) Length of Cut 3 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC49712

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.6250 in. (5/8) Length of Cut 3 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC39612

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74604

0.1875 in. (3/16) Cutter Diameter x 0.0200 in. Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74605

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74404

0.1875 in. (3/16) Cutter Diameter x 0.0200 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74405

0.1875 in. (3/16) Cutter Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74406

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC73910

0.1875 in. (3/16) Cutter Diameter x 0.0200 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC73912