0.3750 in. (3/8) Cutter Diameter x 1.000 in. (1) Length of Cut x 90 Degree included Carbide AlTiN Coated 2 Flute Drill/Endmill

Item Code: DM-375-290X

0.2500 in. (1/4) Cutter Diameter x 0.750 in. (3/4) Length of Cut x 90 Degree included Carbide AlTiN Coated 2 Flute Drill/Endmill

Item Code: DM-250-290X

0.0150 in. (1/64) Cutter Diameter x 0.045 in. Length of Cut Carbide 2 Flute Ball Endmill

Item Code: BMR-015-2

0.3125 in. (5/16) Radius x 0.1200 in. Pilot Diameter Carbide AlTiN Coated 3 Flute Double Ended Corner Rounding Endmill

Item Code: CRE-750-312X

0.5000 in. (1/2) Cutter Diameter x 1.000 in. (1) Length of Cut Carbide 18 RH Teeth 20 LH Teeth Diamond Cut Endmill

Item Code: RDB-110

0.2500 in. (1/4) Radius x 0.1200 in. Pilot Diameter Carbide AlTiN Coated 3 Flute Double Ended Corner Rounding Endmill

Item Code: CRE-625-250X

0.0400 in. Radius x 0.0600 in. Pilot Diameter Carbide 3 Flute Double Ended Corner Rounding Endmill

Item Code: CRE-187-040

0.2500 in. (1/4) Cutter Diameter x 0.750 in. (3/4) Length of Cut Carbide 1 Flute Square Downcut Endmill

Item Code: SFL-250-46

1.000 mm Cutter Diameter x 0.10 mm Radius x 4.00 mm Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: AECM-0101-4X

1.000 mm Cutter Diameter x 0.20 mm Radius x 4.00 mm Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: AECM-0102-4X

2.000 mm Cutter Diameter x 0.20 mm Radius x 5.00 mm Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: AECM-0202-4X

2.000 mm Cutter Diameter x 0.50 mm Radius x 5.00 mm Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: AECM-0205-4X

3.000 mm Cutter Diameter x 0.50 mm Radius x 8.00 mm Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: AECM-0305-4X

4.000 mm Cutter Diameter x 0.20 mm Radius x 11.00 mm Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: AECM-0402-4X

6.000 mm Cutter Diameter x 0.30 mm Radius x 16.00 mm Length of Cut Carbide 4 Flute Corner Radius Endmill

Item Code: AECM-0603-4