1/8 Inch Diameter, 3/8 Inch LOC, 1-1/2 Inch OAL Carbide ALtima® Coated TuffCut® XR 4-Flute Variable Helix End Mill

Item Code: 17712510A

1/4 Inch Diameter, 1/2 Inch LOC, 2-1/2 Inch OAL, Carbide ALtima® Coated TuffCut® XR 4-Flute Variable Helix End Mill

Item Code: 17725010A

1/8 Inch Diameter Standard Length Solid Carbide TuffCut® General Purpose 4-Flute .02 Corner Radius End Mill

Item Code: 11112512

3/16 in. Diameter x 5/8 in. Length of Cut x 2 in. Overall Length 4-Flute Square End Endmill

Item Code: 44110-SIEM

0.5000 in. (1/2) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 2 Flute Carbide Square Endmill

Item Code: TC10232

1/2 Inch Diameter, 1 Inch LOC, 3 Inch OAL, Carbide ALtima® Coated TuffCut® XR 4-Flute Variable Helix End Mill with 0.030 Radius

Item Code: 17750014A

5/16 Tuff Cut® X-AL 3-Flute, Center Cutting Aluminum Finisher Endmill - 7/16 Inch LOC, 2-1/2 Inch OAL

Item Code: 13831202

.5mm Diameter Solid Carbide Altima 52 Coated Center Cutting TuffCut DM® 2-Flute Ball Nose End Mill

Item Code: 15601960A

1/2 Inch Solid Carbide 4-Flute Diamond Coated Standard Length Series 210D Endmill

Item Code: 10318-GARR

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 3 Flute Zplus Coated 35 Deg. Helix Square Endmill

Item Code: 01347

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 1.5500 in. Reach 3 Flute Carbide Ball End Mill

Item Code: 40162-HARVEY

1/4 x 1/2 x 1/4 Inch Carbide Tipped Flush Trim 2-Flute Router Bit

Item Code: 47090-AMANA

0.5000 in. (1/2) Cutter Diameter x 2.0000 in. (2) Neck Length x 300 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 952332

3/8 Inch Solid Carbide Alumastar Coated 3-Flute HSAL Square End Series 143M Endmill

Item Code: 41723-GARR

1/2 Inch Solid Carbide Alumastar Coated 3-Flute HSAL Square End Series 143M Endmill

Item Code: 41943-GARR