0.0470 in. (3/64) Cutter Diameter x 0.0700 in. Length of Cut x 0.9500 in. Reach 3 Flute Carbide Square End Mill

Item Code: 58347

0.0470 in. (3/64) Cutter Diameter x 0.0700 in. Length of Cut x 0.9500 in. Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 58347-C3

0.0600 in. Cutter Diameter x 0.0900 in. Length of Cut x 1.2000 in. Reach 3 Flute Carbide Square End Mill

Item Code: 58360

0.0600 in. Cutter Diameter x 0.0900 in. Length of Cut x 1.2000 in. Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 58360-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 1.2500 in. (1-1/4) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 58362-C3

0.0780 in. (5/64) Cutter Diameter x 0.1170 in. Length of Cut x 1.5620 in. (1-9/16) Reach 3 Flute Carbide Square End Mill

Item Code: 58378-HARVEY

0.0930 in. (3/32) Cutter Diameter x 0.1390 in. Length of Cut x 1.8750 in. (1-7/8) Reach 3 Flute Carbide Square End Mill

Item Code: 58393

0.0930 in. (3/32) Cutter Diameter x 0.1390 in. Length of Cut x 1.8750 in. (1-7/8) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 58393-C3

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 58408-C3

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Reach 3 Flute Carbide Square End Mill

Item Code: 58408-HARVEY

0.1875 in. (3/16) Cutter Diameter x 0.2810 in. (9/32) Length of Cut x 3.7500 in. (3-3/4) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 58412-C3

0.1875 in. (3/16) Cutter Diameter x 0.2810 in. (9/32) Length of Cut x 3.7500 in. (3-3/4) Reach 3 Flute Carbide Square End Mill

Item Code: 58412-HARVEY

0.0150 in. (1/64) Radius x 0.0600 in. Head Diameter x 0.0930 in. (3/32) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 58515

0.0150 in. (1/64) Radius x 0.0600 in. Head Diameter x 0.0930 in. (3/32) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 58515-C3

0.0080 in. Radius x 0.0750 in. (1.9 mm) Head Diameter x 0.3120 in. (5/16) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 58708-C3