0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute Carbide Corner Radius Rougher Endmill

Item Code: TC29786

0.2500 in. (1/4) Cutter Diameter x 0.0200 in. Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute Carbide Corner Radius Rougher Endmill

Item Code: TC29787

0.3125 in. (5/16) Cutter Diameter x 0.0200 in. Radius x 1.6250 in. (1-5/8) Length of Cut 4 Flute Carbide Corner Radius Rougher Endmill

Item Code: TC29788

0.3750 in. (3/8) Cutter Diameter x 0.0200 in. Radius x 2.0000 in. (2) Length of Cut 4 Flute Carbide Corner Radius Rougher Endmill

Item Code: TC29789

0.5000 in. (1/2) Cutter Diameter x 0.0300 in. Radius x 3.0000 in. (3) Length of Cut 4 Flute Carbide Corner Radius Rougher Endmill

Item Code: TC29790

0.6250 in. (5/8) Cutter Diameter x 0.0300 in. Radius x 3.0000 in. (3) Length of Cut 4 Flute Carbide Corner Radius Rougher Endmill

Item Code: TC29791

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC29915

0.2500 in. (1/4) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC29917

0.3125 in. (5/16) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC29918

0.3125 in. (5/16) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC29921

0.3750 in. (3/8) Cutter Diameter x 0.5625 in. (9/16) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC29922

0.3750 in. (3/8) Cutter Diameter x 1.7500 in. (1-3/4) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC29925

0.5000 in. (1/2) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC29926

0.5000 in. (1/2) Cutter Diameter x 2.0000 in. (2) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC29933

0.6250 in. (5/8) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC29934