0.1562 in. (5/32) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 1.2500 in. (1-1/4) Reach 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 54510-C8

0.1562 in. (5/32) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 1.2500 in. (1-1/4) Reach 3 Flute Carbide V-Helix Ball End Mill

Item Code: 54510-HARVEY

0.1875 in. (3/16) Cutter Diameter x 0.2810 in. (9/32) Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute Amorphous Diamond Coated Carbide V-Helix Ball End Mill

Item Code: 54512-C4

0.1875 in. (3/16) Cutter Diameter x 0.2810 in. (9/32) Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 54512-C8

0.1875 in. (3/16) Cutter Diameter x 0.2810 in. (9/32) Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute Carbide V-Helix Ball End Mill

Item Code: 54512-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Reach 3 Flute Amorphous Diamond Coated Carbide V-Helix Ball End Mill

Item Code: 54516-C4

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Reach 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 54516-C8

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Reach 3 Flute Carbide V-Helix Ball End Mill

Item Code: 54516-HARVEY

0.0200 in. (.5 mm) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 54620-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 54620-HARVEY

0.0250 in. Cutter Diameter x 0.0780 in. (5/64) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 54625-C3

0.0312 in. (1/32) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 54631-C3

0.0312 in. (1/32) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 54631-HARVEY

0.0394 in. (1 mm) Cutter Diameter x 0.1870 in. (3/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 54639-C3

0.0394 in. (1 mm) Cutter Diameter x 0.1870 in. (3/16) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 54639-HARVEY