13mm Diameter Endmill, 13mm shank, 2 flutes, 22mm Length of Cut, Carbide, FIREX Coated, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3676-13.000

14mm Diameter Endmill, 14mm shank, 2 flutes, 22mm Length of Cut, Carbide, FIREX Coated, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3676-14.000

15mm Diameter Endmill, 15mm shank, 2 flutes, 26mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3676-15.000

16mm Diameter Endmill, 16mm shank, 2 flutes, 26mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3676-16.000

18mm Diameter Endmill, 18mm shank, 2 flutes, 26mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3676-18.000

2mm Diameter Endmill, 2mm shank, 2 flutes, 6mm Length of Cut, Carbide, FIREX Coated, HA Shank, 32mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3676-2.000

2.5mm Diameter Endmill, 2.5mm shank, 2 flutes, 7mm Length of Cut, Carbide, FIREX Coated, HA Shank, 32mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3676-2.500

20mm Diameter Endmill, 20mm shank, 2 flutes, 32mm Length of Cut, Carbide, FIREX Coated, HA Shank, 104mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3676-20.000

3mm Diameter Endmill, 3mm shank, 2 flutes, 7mm Length of Cut, Carbide, FIREX Coated, HA Shank, 38mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3676-3.000

3.5mm Diameter Endmill, 3.5mm shank, 2 flutes, 7mm Length of Cut, Carbide, FIREX Coated, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3676-3.500

4.5mm Diameter Endmill, 4.5mm shank, 2 flutes, 8mm Length of Cut, Carbide, FIREX Coated, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3676-4.500

5mm Diameter Endmill, 5mm shank, 2 flutes, 10mm Length of Cut, Carbide, FIREX Coated, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3676-5.000

5.5mm Diameter Endmill, 5.5mm shank, 2 flutes, 10mm Length of Cut, Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3676-5.500

6mm Diameter Endmill, 6mm shank, 2 flutes, 10mm Length of Cut, Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3676-6.000

7mm Diameter Endmill, 7mm shank, 2 flutes, 13mm Length of Cut, Carbide, FIREX Coated, HA Shank, 60mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3676-7.000