1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.031 radius

Item Code: 3091-12.704

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3153-4.76

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3093-6.35

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 35/38° Helix Angle, 0.0098 chamfer

Item Code: 3114-12.70

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.0138 chamfer

Item Code: 3114-15.87

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0079 chamfer

Item Code: 3113-9.52

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3165-3.17

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3153-12.70

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3167-7.94

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.062 radius

Item Code: 3079-19.056

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0039 chamfer

Item Code: 3114-4.76

6mm Diameter Endmill, 6mm shank, 3 flutes, 10mm Length of Cut, Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3741-6.00

5mm Diameter Endmill, 5mm shank, 3 flutes, 10mm Length of Cut, Carbide, FIREX Coated, HA Shank, 50mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3741-5.00

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3153-3.17

13mm Diameter Endmill, 13mm shank, 3 flutes, 22mm Length of Cut, Carbide, FIREX Coated, HA Shank, 83mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3741-13.00