Sort Results By:
Relevance Popularity Item Code
Showing: 48,106-48,120 of 66,457
15 25 50
no-image

0.0310 in. (1/32) Neck Diameter x 0.1560 in. (5/32) Reach x 45 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 56845

Unit Size: 1

no-image

0.0310 in. (1/32) Neck Diameter x 0.1560 in. (5/32) Reach x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 56845-C3

Unit Size: 1

no-image

0.0310 in. (1/32) Neck Diameter x 0.1560 in. (5/32) Reach x 60 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 56860-HARVEY

Unit Size: 1

no-image

0.0050 in. Radius x 0.0100 in. Pilot Diameter x 0.2500 in. (1/4) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 56905

Unit Size: 1

no-image

0.0080 in. Radius x 0.0100 in. Pilot Diameter x 0.2500 in. (1/4) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 56908

Unit Size: 1

no-image

0.0100 in. Radius x 0.0100 in. Pilot Diameter x 0.2500 in. (1/4) Reach 2 Flute AlTiN Coated Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 56910-C3

Unit Size: 1

no-image

0.0100 in. Radius x 0.0100 in. Pilot Diameter x 0.2500 in. (1/4) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 56910-HARVEY

Unit Size: 1

no-image

0.0310 in. (1/32) Neck Diameter x 0.2500 in. (1/4) Reach x 15 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 57215-HARVEY

Unit Size: 1

no-image

0.0310 in. (1/32) Neck Diameter x 0.2500 in. (1/4) Reach x 30 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 57230-C3

Unit Size: 1

no-image

0.0310 in. (1/32) Neck Diameter x 0.2500 in. (1/4) Reach x 30 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 57230-HARVEY

Unit Size: 1

no-image

0.0310 in. (1/32) Neck Diameter x 0.2500 in. (1/4) Reach x 45 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 57245

Unit Size: 1

no-image

0.0310 in. (1/32) Neck Diameter x 0.2500 in. (1/4) Reach x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 57245-C3

Unit Size: 1

no-image

0.0310 in. (1/32) Neck Diameter x 0.2500 in. (1/4) Reach x 60 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 57260-HARVEY

Unit Size: 1

no-image

0.0050 in. Radius x 0.0100 in. Pilot Diameter x 0.3750 in. (3/8) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 57305-HARVEY

Unit Size: 1

no-image

0.0080 in. Radius x 0.0100 in. Pilot Diameter x 0.3750 in. (3/8) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 57308-HARVEY

Unit Size: 1

Showing: 48106-48120 of 66457