7/16 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1 Length of Cut, 2-1/2 Reach, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 35/38° Helix Angle, 0.0079 chamfer

Item Code: 4251-11.110

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, 2-1/2 Reach, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 35/38° Helix Angle, 0.0138 chamfer

Item Code: 4251-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, 2-1/2 Reach, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 35/38° Helix Angle, 0.0177 chamfer

Item Code: 4251-19.050

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, 2-5/8 Reach, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 35/38° Helix Angle, 0.0295 chamfer

Item Code: 4251-25.400

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, 1 Reach, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0039 chamfer

Item Code: 4251-4.760

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, 1-3/4 Reach, Carbide, FIREX Coated, HA Shank, 3-1/4 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

Item Code: 4251-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, 1-3/4 Reach, Carbide, FIREX Coated, HA Shank, 3-1/4 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

Item Code: 4251-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, 2-1/4 Reach, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 35/38° Helix Angle, 0.0079 chamfer

Item Code: 4251-9.520

7/16 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 3 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 40° Helix Angle, 0.0079 chamfer

Item Code: 4252-11.110

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 3 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 40° Helix Angle, 0.0098 chamfer

Item Code: 4252-12.700

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3 Length of Cut, Carbide, FIREX Coated, HA Shank, 6 Overall Length, 40° Helix Angle, 0.0138 chamfer

Item Code: 4252-15.870

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 3-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 6 Overall Length, 40° Helix Angle, 0.0295 chamfer

Item Code: 4252-25.400

1-1/4 Inch Diameter Endmill, 1-1/4 Shank, 4 flutes, 4 Length of Cut, Carbide, FIREX Coated, HA Shank, 7-1/2 Overall Length, 40° Helix Angle, 0.0315 chamfer

Item Code: 4252-31.750

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1-3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 40° Helix Angle, 0.0059 chamfer

Item Code: 4252-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 1-3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 40° Helix Angle, 0.0059 chamfer

Item Code: 4252-7.940