27/64 Inch Diameter Endmill, 7/16 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3148-10.72

13/32 Inch Diameter Endmill, 7/16 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3148-10.32

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3148-12.70

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, nano-Si Coated, HA Shank, 3-1/2 Overall Length, 55° Helix Angle, 0.0059 chamfer

Item Code: 3182-15.87

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 30° Helix Angle, 0.0197 chamfer

Item Code: 3097-15.87

6mm Diameter Endmill, 6mm shank, 3 flutes, 13mm Length of Cut, 28 Reach (mm), Carbide, Bright Finish, HA Shank, 65mm Overal Length, 39/40/41° Helix Angle, 0.12 chamfer (mm)

Item Code: 3473-6.00

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/37/38° Helix Angle, 0.0201 chamfer

Item Code: 6757-15.87

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 40° Helix Angle, 0.0098 chamfer

Item Code: 4250-12.70

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

Item Code: 3113-6.35

5/8 Inch Diameter Endmill, 5/8 Shank, 2 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3160-15.87

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.062 radius

Item Code: 6759-12.706

10mm Diameter Endmill, 10mm shank, 2 flutes, 40mm Length of Cut, Carbide, HA Shank, 100mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3011-10.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 45mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3011-12.000

14mm Diameter Endmill, 14mm shank, 2 flutes, 45mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3011-14.000

16mm Diameter Endmill, 16mm shank, 2 flutes, 65mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3011-16.000