0.0120 in. (.3 mm) Cutter Diameter x 0.0030 in. Radius x 0.0360 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: 47212-C3

0.3750 in. (3/8) Cutter Diameter x 0.5700 in. Length of Cut 4 Flute Amorphous Diamond Coated Carbide Square Endmill

Item Code: 50324-C4

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 4 Flute AlTiN Coated Carbide Square Endmill

Item Code: 50332-C3

0.0100 in. Cutter Diameter x 0.0500 in. Length of Cut 4 Flute AlTiN Coated Carbide Square Finisher Endmill

Item Code: 53310-C6

0.0300 in. Cutter Diameter x 0.1560 in. (5/32) Length of Cut 5 Flute AlTiN Coated Carbide Square Finisher Endmill

Item Code: 53330-C6

0.0050 in. Radius x 0.0100 in. Pilot Diameter x 0.2500 in. (1/4) Reach 2 Flute AlTiN Coated Carbide Corner Rounding Endmill

Item Code: 56905-C3

0.0080 in. Radius x 0.0100 in. Pilot Diameter x 0.3750 in. (3/8) Reach 2 Flute AlTiN Coated Carbide Corner Rounding Endmill

Item Code: 57308-C3

0.0200 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.7500 in. (3/4) Reach 2 Flute AlTiN Coated Carbide Corner Rounding Endmill

Item Code: 57420-C3

0.1406 in. (9/64) Cutter Diameter x 0.2200 in. Length of Cut x 0.7500 in. (3/4) Reach 4 Flute AlTiN Nano Coated Carbide Ball Endmill

Item Code: 63709-C6

0.0520 in. Cutter Diameter x 0.1560 in. (5/32) Length of Cut 2 Flute Amorphous Diamond Coated Carbide Square Endmill

Item Code: 72052-C4

0.1875 in. (3/16) Shank Diameter x 20 Deg. per side 2 Flute TiB2 Coated Carbide Pointed Chamfer Cutter

Item Code: 72420-C8

0.3750 in. (3/8) Shank Diameter x 50 Deg. per side 2 Flute TiB2 Coated Carbide Pointed Chamfer Cutter

Item Code: 72550-C8

0.0980 in. (2.5 mm) Cutter Diameter x 0.2940 in. Length of Cut 4 Flute AlTiN Coated Carbide Ball Endmill

Item Code: 74398-C3

0.0312 in. (1/32) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting Endmill

Item Code: 745431-C6

0.0625 in. (1/16) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting Endmill

Item Code: 745462-C6