0.3750 in. (3/8) Cutter Diameter x 1.1250 in. (1-1/8) Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Square End Mill

Item Code: 942324-C4

0.5000 in. (1/2) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 3 Flute Carbide V-Helix Square End Mill

Item Code: 942332

0.5000 in. (1/2) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Square End Mill

Item Code: 942332-C8

10.000 mm Cutter Diameter x 30.000 mm Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square End Mill

Item Code: 942873-C6

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut 4 Flute Amorphous Diamond Coated Carbide Reduce Shank Square End Mill

Item Code: 943208-C4

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 4 Flute Amorphous Diamond Coated Carbide Reduce Shank Square End Mill

Item Code: 943216-C4

0.3750 in. (3/8) Cutter Diameter x 0.5630 in. Length of Cut 4 Flute Amorphous Diamond Coated Carbide Reduce Shank Square End Mill

Item Code: 943224-C4

0.4375 in. (7/16) Cutter Diameter x 0.6560 in. (21/32) Length of Cut 4 Flute Carbide Reduce Shank Square End Mill

Item Code: 943228

0.4375 in. (7/16) Cutter Diameter x 0.6560 in. (21/32) Length of Cut 4 Flute AlTiN Coated Carbide Reduce Shank Square End Mill

Item Code: 943228-C3

0.1250 in. (1/8) Head Diameter x 0.0220 in. Loc x 0.2180 in. (7/32) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 943415

0.1250 in. (1/8) Head Diameter x 0.0220 in. Loc x 0.2180 in. (7/32) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 943415-C3

0.1875 in. (3/16) Head Diameter x 0.0330 in. Loc x 0.3750 in. (3/8) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 943435

0.1875 in. (3/16) Head Diameter x 0.0330 in. Loc x 0.3750 in. (3/8) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 943435-C3

0.1400 in. Cutter Diameter x 0.2200 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 944309-C6

0.3125 in. (5/16) Cutter Diameter x 0.0400 in. Radius x 1.0000 in. (1) Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 945140