1/2 x 1/2 x 2 x 4 Inch TuffCut XR7, 7-Flute, ALtima® Blaze Coated Carbide Endmill - Long with Chipbreaker

Item Code: 180L5000B

1/4 (.2500) 4-Flutes, Straight, Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

Item Code: 36146-FULLERTON

5/16 in. Diameter x 1-1/2 in. Length of Cut x 4 in. Overall Length Carbide 4 Flutes Square GMX-35 Coated Endmill

Item Code: GM516FXL4

0.1870 in. Cutter Diameter x 0.7500 in. (3/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 897712-C3

0.0310 in. (1/32) Cutter Diameter x 0.1560 in. (5/32) Length of Cut 6 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 62631-C6

0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1870 in. (3/16) Length of Cut x 0.6250 in. (5/8) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 42808-C3

2.000 Mm Cutter Diameter x 1.600 Mm Length of Cut x 10.000 Mm Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 881745-C6

3/16 in. Diameter x 5/8 in. Length of Cut x 2 in. Overall Length x 0.03 in. Radius Carbide 4 Flutes WTF Coated Endmill

Item Code: GMRF316R4030WTF

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 20° Helix Angle, 0.0118 chamfer

Item Code: 3189-9.52

0.0400 in. Cutter Diameter x 0.0100 in. Radius x 0.0600 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 994540-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut 5 Flute AlTiN Coated Carbide Square Endmill

Item Code: 739462-C3

0.0780 in. (5/64) Cutter Diameter x 0.0100 in. Radius x 0.1170 in. Length of Cut x 0.4060 in. (13/32) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 41578-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 0.2500 in. (1/4) Reach 3 Flute Amorphous Diamond Coated Carbide Ball End Mill

Item Code: 35620-C4

1/8 in. Diameter x 0.062 in. Length of Cut x 1-1/2 in. Overall Length x 90 Deg. Internal Angle Carbide Chamfer Mill

Item Code: CM18C2090U

1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-3.170