12.00mm (.4724) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Extra-Long

Item Code: 92232

0.0620 in. (1/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 912062-C6

APPT160416PDERMM Grade TN6540 Carbide TiAlN Coated APPT Milling Insert

Item Code: APPT160416PDERMM TN6540

0.1520 in. Min Bore Diameter x 0.250 in. (1/4) Max Bore Depth x 0.1250 in. (1/8) Tooth Width x 0.0350 in. Projection x 0.1875 in. (3/16) Shank Diameter x 2.00 in. (2) Overall Length x 0.0060 in. Radius Carbide Right Hand Boring Tool

Item Code: BB-140250

0.1562 in. (5/32) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 300 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 984010-C3

3/64 Inch Diameter, Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 5519-1.190

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length 7 Flute Tplus Coated Carbide Square Endmill

Item Code: 59946-HELICAL

.2560 Inch Solid Carbide Straight Flute TrueSize® Chucking Reamer

Item Code: 27225600

0.3125 in. (5/16) Cutter Diameter x 0.3125 in. (5/16) Shank Diameter x 0.0300 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 4 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 43227

3/8 Inch, 135 Degree Drill Point Angle, TiAICr/TiSi Coated, Solid Carbide Screw Machine Drill Bit

Item Code: MDW03750GS2

0.0400 in. Diameter x 0.2810 in. (9/32) Margin Length 4 Flute Carbide Miniature Reamer

Item Code: RSB0400

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.2340 in. (15/64) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 50078-HARVEY

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.1180 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 993878

5/64 (.0781) Dura-Carb Series 3215 2-Flute GP SE End Mill- Square

Item Code: 32062

9/64 Cobalt Oxide/Gold Finish 135 Deg. Split Point Heavy-Duty Screw Machine Drill

Item Code: 040309