0.3750 in. (3/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1370 in. Width x 0.5000 in. (1/2) Neck Length 6 Flute Carbide Tip Radius Double Angle Shank Cutter

Item Code: 988624

0.5000 in. (1/2) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2000 in. Width x 0.5000 in. (1/2) Neck Length 6 Flute Carbide Tip Radius Double Angle Shank Cutter

Item Code: 988632

0.5000 in. (1/2) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2000 in. Width x 0.5000 in. (1/2) Neck Length 6 Flute AlTiN Coated Carbide Tip Radius Double Angle Shank Cutter

Item Code: 988632-C3

0.400 mm Cutter Diameter x 0.600 mm Length of Cut x 2.000 mm Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 988709-C6

0.500 mm Cutter Diameter x 0.750 mm Length of Cut x 2.500 mm Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 988711-C6

0.600 mm Cutter Diameter x 0.900 mm Length of Cut x 3.000 mm Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 988713-C6

0.800 mm Cutter Diameter x 1.200 mm Length of Cut x 4.000 mm Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 988718-C6

1.000 mm Cutter Diameter x 1.500 mm Length of Cut x 5.000 mm Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 988722-C6

1.500 mm Cutter Diameter x 2.200 mm Length of Cut x 7.500 mm Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 988733-C6

2.000 mm Cutter Diameter x 3.000 mm Length of Cut x 10.000 mm Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 988745-C6

3.000 mm Cutter Diameter x 4.500 mm Length of Cut x 15.000 mm Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 988757-C6

0.0840 in. Cutter Diameter x 0.0200 in. Width (TSC) x 0.2180 in. (7/32) Neck Length 4 Flute Carbide Thread Relief Cutter

Item Code: 988804

0.0840 in. Cutter Diameter x 0.0200 in. Width (TSC) x 0.2180 in. (7/32) Neck Length 4 Flute AlTiN Coated Carbide Thread Relief Cutter

Item Code: 988804-C3

0.5000 in. (1/2) Cutter Diameter x 0.0310 in. (1/32) Width x 0.7500 in. (3/4) Neck Length 6 Flute Carbide Square Keyseat Cutter for Non-Ferrous

Item Code: 988910

0.5000 in. (1/2) Cutter Diameter x 0.0310 in. (1/32) Width x 0.7500 in. (3/4) Neck Length 6 Flute TiB2 Coated Carbide Square Keyseat Cutter for Non-Ferrous

Item Code: 988910-C8