M10 x 1.5 TiCN Coated 3 Left-Hand Spiral Flutes 6HX HSS-E-PM Form D Plug Chamfer Tap

Item Code: GT205075 WU32MG

WNMG431 EGU AC820P Grade, AI2O3 Coated, Carbide Turning Insert

Item Code: WNMG431EGU AC820P

3/8 in. x 1/4 in. x 5/8 in. x 2-58 in. SE-3 Single Cut Bur

Item Code: 35516-IMCO

#40 x 6 Inch HSS Black Oxide 135° Series 6H501 Aircraft Extension Drill

Item Code: 95005837

7.00 mm x 91 mm OAL Carbide TiAIN 5xD 140 Deg. 2 Flute High Performance Drill

Item Code: VDS202A07000 WU25PD

0.2500 in. (1/4) Cutter Diameter x 0.0050 in. Radius x 90 Deg. Included 2 Flute AlTiN Coated Carbide Tip Radius Dovetail Cutter

Item Code: 66316-C3

#21 HSS Black & Gold 137° Series JH522 Jobber Drill

Item Code: 95006120

1/2 x 1/2 x 1-1/4 x 3 Inch AlTiN Coated Solid Carbide 5-Flute .030 Corner Radius End Mill

Item Code: 5V0C13015BW-WP15PE

W Diameter, 7xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

Item Code: 5512-9.80

0.0470 in. (3/64) Cutter Diameter x 0.1410 in. Length of Cut x 0.4230 in. Reach 4 Flute Carbide Square End Mill

Item Code: 76447

1/2 HSS Bright 118° Series JH800 Jobber Drill

Item Code: 95000578

4.039mm (.1590) x 66mm OAL TiAlN 3xD HP Carbide Drill Bit

Item Code: VDS201A04039 WU25PD

5.1mm ALtima® Coated Twister® XD 3X Solid Carbide Stub High Performance Drill

Item Code: 2XDSS2008A

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 3-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 6 Overall Length, 40° Helix Angle, 0.0177 chamfer

Item Code: 4252-19.05

9/64 HSS Titanium 135° Series JH513 Jobber Drill Rocky Mountain Twist

Item Code: 95000755