0.1875 in. (3/16) Shank Diameter x 45 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 72445

0.0200 in. (.5 mm) Cutter Diameter x 0.0600 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 73020-HARVEY

0.1250 in. (1/8) Shank Diameter x 40 Deg. Included 1 Flute Amorphous Diamond Coated Carbide Pointed Engraver

Item Code: 25110-C4

0.0150 in. (1/64) Radius x 0.0200 in. (.5 mm) Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 45315-C3

0.0900 in. Cutter Diameter x 0.4500 in. Length of Cut 3 Flute Carbide Square End Mill

Item Code: 31890

0.3750 in. (3/8) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Width x 0.5620 in. (9/16) Neck Length 8 Flute Carbide Corner Radius Keyseat Cutter

Item Code: 981650

0.2500 in. (1/4) Cutter Diameter x 0.1490 in. Width x 0.3120 in. (5/16) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 29750-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 0.2500 in. (1/4) Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 35420-C4

0.0050 in. Radius x 0.0600 in. Head Diameter x 0.2500 in. (1/4) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 58005-HARVEY

0.0050 in. Radius x 0.1150 in. Head Diameter x 0.8750 in. (7/8) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 59805

0.0780 in. (5/64) Cutter Diameter x 0.0100 in. Radius x 0.1180 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52278-C6

0.2500 in. (1/4) Shank Diameter x 30 Deg. Included 2 Flute TiB2 Coated Carbide Marking Cutter For Non-Ferrous

Item Code: 967415-C8

0.1875 in. (3/16) Shank Diameter x 0.0050 in. Radius x 60 Deg. Included 1 Flute AlTiN Coated Carbide Radius Engraver

Item Code: 48120-C3

0.2500 in. (1/4) Shank Diameter x 0.0050 in. Radius x 60 Deg. Included 1 Flute AlTiN Coated Carbide Radius Engraver

Item Code: 48130-C3

0.2500 in. (1/4) Cutter Diameter x 0.1870 in. (3/16) Neck Length x 300 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 990616-C3