0.3750 in. (3/8) Cutter Diameter x 0.0330 in. Width x 1.5000 in. (1-1/2) Neck Length 6 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 934324

0.3750 in. (3/8) Cutter Diameter x 0.0330 in. Width x 1.5000 in. (1-1/2) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 934324-C3

0.5000 in. (1/2) Cutter Diameter x 0.0500 in. Width x 1.5000 in. (1-1/2) Neck Length 6 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 934332

0.5000 in. (1/2) Cutter Diameter x 0.0500 in. Width x 1.5000 in. (1-1/2) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 934332-C3

0.1875 in. (3/16) Cutter Diameter x 0.0600 in. Radius x 0.1500 in. Length of Cut x 0.5700 in. Reach 4 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 934412-C6

0.2500 in. (1/4) Cutter Diameter x 0.0600 in. Radius x 0.2000 in. Length of Cut x 0.7500 in. (3/4) Reach 4 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 934416-C6

0.0310 in. (1/32) Radius x 0.1860 in. Length of Cut x 30 Deg. Per Side 2 Flute Carbide Runner Cutter

Item Code: 934502

0.0310 in. (1/32) Radius x 0.1860 in. Length of Cut x 30 Deg. Per Side 2 Flute AlTiN Coated Carbide Runner Cutter

Item Code: 934502-C3

0.0470 in. (3/64) Radius x 0.2240 in. Length of Cut x 30 Deg. Per Side 2 Flute Carbide Runner Cutter

Item Code: 934503

0.0470 in. (3/64) Radius x 0.2240 in. Length of Cut x 30 Deg. Per Side 2 Flute AlTiN Coated Carbide Runner Cutter

Item Code: 934503-C3

0.0620 in. (1/16) Radius x 0.2630 in. Length of Cut x 30 Deg. Per Side 2 Flute Carbide Runner Cutter

Item Code: 934504

0.0620 in. (1/16) Radius x 0.2630 in. Length of Cut x 30 Deg. Per Side 2 Flute AlTiN Coated Carbide Runner Cutter

Item Code: 934504-C3

0.2500 in. (1/4) Cutter Diameter x 0.0100 in. Radius x 0.0840 in. Width x 0.3120 in. (5/16) Neck Length 4 Flute Carbide Tip Radius Double Angle Shank Cutter

Item Code: 934716

0.2500 in. (1/4) Cutter Diameter x 0.0100 in. Radius x 0.0840 in. Width x 0.3120 in. (5/16) Neck Length 4 Flute AlTiN Coated Carbide Tip Radius Double Angle Shank Cutter

Item Code: 934716-C3

0.3750 in. (3/8) Cutter Diameter x 0.0100 in. Radius x 0.0840 in. Width x 0.5000 in. (1/2) Neck Length 6 Flute Carbide Tip Radius Double Angle Shank Cutter

Item Code: 934724