0.3750 in. (3/8) Cutter Diameter x 0.0156 in. (1/64) Radius x 0.5630 in. Neck Length 6 Flute AlTiN Coated Carbide Full Radius Keyseat Cutter

Item Code: 68415-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute TiB2 Coated Carbide V-Helix Square End Mill

Item Code: 927162-C8

0.1875 in. (3/16) Cutter Diameter x 0.0350 in. Width x 0.2810 in. (9/32) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22235-C3

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.4060 in. (13/32) Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53078-C4

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 20 Deg. Included 2 Flute AlTiN Coated Carbide Tip Radius Dovetail Cutter

Item Code: 16406-C3

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 1 Deg. 1.0270 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 925091-C8

0.0800 in. Radius x 0.0460 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 17080-C3

0.2500 in. (1/4) Shank Diameter x 45 Deg. Per Side 12 RH Teeth 6 LH Teeth AlTiN Coated Carbide Deburring Chamfer Cutter

Item Code: 994045-C3

0.2500 in. (1/4) Shank Diameter x 45 Deg. Per Side 12 RH Teeth 6 LH Teeth Carbide Deburring Chamfer Cutter

Item Code: 994045

0.1100 in. (2.8 mm) Cutter Diameter x 0.1650 in. Length of Cut 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 51002-C3

0.1875 in. (3/16) Cutter Diameter x 0.0300 in. Radius x 0.2810 in. (9/32) Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 42412-C3

0.0930 in. (3/32) Cutter Diameter x 0.0740 in. Length of Cut x 1 Deg. 1.1750 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 925072-C8

0.0600 in. Radius x 0.1250 in. (1/8) Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 45360-C3

0.1875 in. (3/16) Cutter Diameter x 0.2810 in. (9/32) Length of Cut x 1.0000 in. (1) Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 33512-C3

0.812 mm Drill Diameter x 8.000 mm Flute Length 2 Flute AlTiN Nano Coated Carbide Miniature High Performance Drill

Item Code: ARY0320-C6