16mm Diameter Endmill, 16mm shank, 6 flutes, 32mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 45° Helix Angle, 2 radius (mm)

Item Code: 3112-16.020

20mm Diameter Endmill, 20mm shank, 8 flutes, 38mm Length of Cut, Carbide, HA Shank, 104mm Overal Length, 45° Helix Angle, 2 radius (mm)

Item Code: 3112-20.020

6mm Diameter Endmill, 6mm shank, 6 flutes, 13mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 45° Helix Angle, 1 radius (mm)

Item Code: 3112-6.010

8mm Diameter Endmill, 8mm shank, 6 flutes, 19mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 45° Helix Angle, 0.5 radius (mm)

Item Code: 3112-8.005

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 35/38° Helix Angle, 0.0138 chamfer

Item Code: 3113-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 35/38° Helix Angle, 0.0177 chamfer

Item Code: 3113-19.050

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 35/38° Helix Angle, 0.0295 chamfer

Item Code: 3113-25.400

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0039 chamfer

Item Code: 3113-4.760

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 35/38° Helix Angle, 0.0295 chamfer

Item Code: 3114-25.400

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.002 chamfer

Item Code: 3114-3.170

1-1/4 Inch Diameter Endmill, 1-1/4 Shank, 4 flutes, 2-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 6 Overall Length, 35/38° Helix Angle, 0.0315 chamfer

Item Code: 3114-31.750

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

Item Code: 3114-6.350

1 Inch Diameter Endmill, 1 Shank, 6 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 44/45/46° Helix Angle, 0.0118 chamfer

Item Code: 3115-25.400

10mm Diameter Endmill, 10mm shank, 2 flutes, 11mm Length of Cut, Carbide, HB Shank, 66mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3126-10.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 12mm Length of Cut, Carbide, HB Shank, 73mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

Item Code: 3126-12.000