0.0650 in. Cutter Diameter x 0.1950 in. Length of Cut x 0.5000 in. (1/2) Reach 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 76865-C3

0.0900 in. Cutter Diameter x 0.4500 in. Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 62690-C6

0.3750 in. (3/8) Shank Diameter x 22.5 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 72523-C3

0.1250 in. (1/8) Radius x 0.1070 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 68125-HARVEY

0.0469 in. (3/64) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 3 Flute Carbide Square Upcut End Mill Slow Finisher

Item Code: 992347

0.3125 in. (5/16) Cutter Diameter x 0.0500 in. Width x 0.4680 in. (15/32) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22422-C3

0.0118 in. (.3 mm) Drill Diameter x 0.1800 in. Flute Length 2 Flute AlTiN Coated Carbide Miniature Drill

Item Code: 20118-C3

0.0070 in. Cutter Diameter x 0.0210 in. Length of Cut 2 Flute Carbide Square End Mill

Item Code: 72007-HARVEY

0.0100 in. Cutter Diameter x 0.0300 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 73010

0.1875 in. (3/16) Shank Diameter x 20 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 978120-C3

1.400 mm Cutter Diameter x 7.000 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 974531-C6

0.1250 in. (1/8) Cutter Diameter x 0.0050 in. Radius x 0.0670 in. Width x 0.1870 in. (3/16) Neck Length 4 Flute AlTiN Coated Carbide Tip Radius Double Angle Shank Cutter

Item Code: 45808-C3

0.1875 in. (3/16) Cutter Diameter x 0.0300 in. Radius x 0.2810 in. (9/32) Length of Cut x 2.2500 in. (2-1/4) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 42612-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.9500 in. Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 953362-C6

0.0930 in. (3/32) Cutter Diameter x 0.3750 in. (3/8) Reach 4 Flute Carbide Single Form #5 Thread Milling Cutter

Item Code: 41415-HARVEY