0.600 mm Drill Diameter x 2.900 mm Flute Length 2 Flute AlTiN Nano Coated Carbide Miniature High Performance Drill

Item Code: CSG0236-C6

8.0mm Twister XD® 7X+, Coolant Fed, Long, High Performance Drill

Item Code: 2XDCL3150A

7/16 in. HSS Black Oxide 118 Deg. Standard Point General Purpose Jobber Drill

Item Code: 010028

0.1090 in. (7/64) Cutter Diameter x 0.3270 in. Length of Cut x 0.5700 in. Reach 2 Flute Carbide Ball End Mill

Item Code: 948602

#1 HSS Black Oxide 135° Series JH501 Jobber Drill

Item Code: 95002600

0.5000 in. (1/2) Cutter Diameter x 1.0000 in. (1) Length of Cut x 90 Deg. Included 2 Flute AlTiN Coated Carbide Drill / Endmill

Item Code: TC32232

1/2 x 1/2 x 2 x 4 Inch Solid Carbide TiAlN Coated 4 Flute Endmill

Item Code: I4S0500T200L TIALN

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 878562

3/8 Inch Solid Carbide, AlTiN Coated, 4-Flute, 7/8 LOC, 2-1/2 Inch OAL, Single End Ball Nose Endmill

Item Code: 54230-COATED

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 0.6250 in. (5/8) Length of Cut x 3.2500 in. (3-1/4) Overall Length x 1.7500 in. (1-3/4) Reach Carbide 2 Flute Corner Radius High Balance Endmill

Item Code: 59984

4-40 UNC, High Speed Steel, TiN, H2 Plug, 2-Flute, Gun Tap

Item Code: 19016

5.0mm Twister® GP, 120° Point, 21° Helix, Carbide NC Spotting Drill

Item Code: 40319680

5.8mm Diameter 5xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

Item Code: 5511-5.80

#28 Cobalt 135° Series JC514 Jobber Drill

Item Code: 95004627

0.1130 in. Cutter Diameter x 0.0310 in. (1/32) Radius x 48 Deg. Included 2 Flute TiB2 Coated Carbide Dovetail Cutter Without Drop Hole Allowance

Item Code: 23921-C8