0.2500 in. (1/4) Cutter Diameter x 0.0200 in. Radius x 0.3750 in. (3/8) Neck Length 6 Flute Carbide Full Radius Keyseat Cutter

Item Code: 67720

0.2500 in. (1/4) Cutter Diameter x 0.0780 in. (5/64) Width x 0.3750 in. (3/8) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22378-C3

0.5000 in. (1/2) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Width x 0.7500 in. (3/4) Neck Length 8 Flute Carbide Corner Radius Stagger Keyseat Cutter

Item Code: 44650

0.1350 in. Cutter Diameter x 0.0150 in. (1/64) Radius x 48 Deg. Included 2 Flute Carbide Corner Radius Dovetail Cutter With Drop Hole Allowance

Item Code: 23814

0.0790 in. (2 mm) Cutter Diameter x 0.0150 in. (1/64) Radius x 48 Deg. Included 2 Flute AlTiN Coated Carbide Corner Radius Dovetail Cutter With Drop Hole Allowance

Item Code: 23807-C3

0.1065 in. Drill Diameter x 0.4130 in. Flute Length 2 Flute Carbide Miniature Drill

Item Code: 20467

0.2500 in. (1/4) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 1 Flute Amorphous Diamond Coated Carbide Square Upcut End Mill

Item Code: 52516-C4

0.0390 in. Radius x 0.2490 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 21039-HARVEY

0.0780 in. (5/64) Radius x 0.0460 in. Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 17078

0.0100 in. Cutter Diameter x 0.0150 in. (1/64) Length of Cut x 0.0800 in. Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 34210-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0160 in. Length of Cut x 0.0620 in. (1/16) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 31420-C6

0.0150 in. (1/64) Cutter Diameter x 0.0220 in. Length of Cut x 0.1870 in. (3/16) Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 35615-C3

0.0310 in. (1/32) Cutter Diameter x 0.0460 in. Length of Cut x 0.4700 in. Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 49231-C3

0.0625 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 52862-C3

0.0310 in. (1/32) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.2790 in. Reach 4 Flute Carbide Square End Mill

Item Code: 76431