0.1250 in. (1/8) Cutter Diameter x 0.1880 in. Length of Cut x 2 Deg. 2.0000 in. (2) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 18908-C6

0.0310 in. (1/32) Cutter Diameter x 0.0470 in. (3/64) Length of Cut x 2 Deg. 1.5000 in. (1-1/2) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 24831-C6

0.1250 in. (1/8) Cutter Diameter x 0.0310 in. (1/32) Width x 0.0620 in. (1/16) Neck Length 6 Flute AlTiN Coated Carbide Square Deep Keyseat Cutter

Item Code: 982531-C3

0.3125 in. (5/16) Cutter Diameter x 60 Deg. Included 3 Flute AlTiN Coated Carbide Pointed Dovetail Cutter

Item Code: 995220-C3

0.5000 in. (1/2) Cutter Diameter x 60 Deg. Included 3 Flute AlTiN Coated Carbide Pointed Dovetail Cutter

Item Code: 995232-C3

0.0930 in. (3/32) Cutter Diameter x 0.0250 in. Width x 0.1410 in. Neck Length 4 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 28225-C3

0.3750 in. (3/8) Cutter Diameter x 0.0100 in. Radius x 90 Deg. Included 3 Flute Carbide Tip Radius Dovetail Cutter

Item Code: 16824-HARVEY

0.2500 in. (1/4) Shank Diameter x 40 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 18540

0.2500 in. (1/4) Shank Diameter x 55 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 18555

0.0310 in. (1/32) Cutter Diameter x 0.0100 in. Radius x 0.2500 in. (1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 938031-C3

0.0500 in. Cutter Diameter x 0.0400 in. Length of Cut x 0.0780 in. (5/64) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 37850-C6

0.0550 in. (1.4 mm) Cutter Diameter x 0.0820 in. Length of Cut 4 Flute Amorphous Diamond Coated Carbide Ball End Mill

Item Code: 24655-C4

0.3750 in. (3/8) Cutter Diameter x 0.1250 in. (1/8) Width x 0.3120 in. (5/16) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 946905-C3

0.2500 in. (1/4) Cutter Diameter x 0.0780 in. (5/64) Width x 0.7500 in. (3/4) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 43978-C3

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.4060 in. (13/32) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 53078-HARVEY