0.7500 in. (3/4) Shank Diameter x 60 Deg. Per Side 6 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 949360-C3

0.1250 in. (1/8) Cutter Diameter x 0.5000 in. (1/2) Length of Cut x 82 Deg. Included Mill Style 2 Flute TiB2 Coated Carbide Drill/End Mill

Item Code: 949408-C8

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut x 82 Deg. Included Mill Style 2 Flute TiB2 Coated Carbide Drill/End Mill

Item Code: 949416-C8

0.3125 in. (5/16) Cutter Diameter x 0.8120 in. (13/16) Length of Cut x 82 Deg. Included Mill Style 2 Flute Carbide Drill/End Mill

Item Code: 949420

0.3125 in. (5/16) Cutter Diameter x 0.8120 in. (13/16) Length of Cut x 82 Deg. Included Mill Style 2 Flute AlTiN Coated Carbide Drill/End Mill

Item Code: 949420-C3

0.1870 in. Cutter Diameter x 0.0100 in. Radius x 0.0780 in. (5/64) Width x 0.2810 in. (9/32) Neck Length 6 Flute Carbide Corner Radius Keyseat Cutter

Item Code: 949978

0.1870 in. Cutter Diameter x 0.0100 in. Radius x 0.0780 in. (5/64) Width x 0.2810 in. (9/32) Neck Length 6 Flute AlTiN Coated Carbide Corner Radius Keyseat Cutter

Item Code: 949978-C3

0.0394 in. (1 mm) Cutter Diameter x 0.0780 in. (5/64) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 95111M

0.0394 in. (1 mm) Cutter Diameter x 0.0780 in. (5/64) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 95111M-C3

0.0312 in. (1/32) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 951131

0.0312 in. (1/32) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 951131-C3

0.0469 in. (3/64) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 951147

0.0469 in. (3/64) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 951147-C3

0.1562 in. (5/32) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 951210

0.1562 in. (5/32) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 951210-C3