1.83mm Diameter Micro Drill, 2 flutes, HSS-E-PM, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 301-1.830

1.84mm Diameter Micro Drill, 2 flutes, HSS-E-PM, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 301-1.840

#49 Diameter, Micro Drill, 2 flutes, HSS-E-PM, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 301-1.850

1.9mm Diameter Micro Drill, 2 flutes, HSS-E-PM, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 301-1.900

10mm Diameter Endmill, 10mm shank, 2 flutes, 40mm Length of Cut, Carbide, HA Shank, 100mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3011-10.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 45mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3011-12.000

14mm Diameter Endmill, 14mm shank, 2 flutes, 45mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3011-14.000

16mm Diameter Endmill, 16mm shank, 2 flutes, 65mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3011-16.000

18mm Diameter Endmill, 18mm shank, 2 flutes, 65mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3011-18.000

20mm Diameter Endmill, 20mm shank, 2 flutes, 65mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3011-20.000

3mm Diameter Endmill, 3mm shank, 2 flutes, 20mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3011-3.000

4mm Diameter Endmill, 4mm shank, 2 flutes, 25mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3011-4.000

5mm Diameter Endmill, 5mm shank, 2 flutes, 30mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3011-5.000

6mm Diameter Endmill, 6mm shank, 2 flutes, 30mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3011-6.000

8mm Diameter Endmill, 8mm shank, 2 flutes, 40mm Length of Cut, Carbide, HA Shank, 100mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3011-8.000