5/8 Inch Diameter Endmill, 5/8 Shank, 3 flutes, 7/8 Length of Cut, Carbide, HA Shank, 5 Overall Length, 45° Helix Angle, 0.025 radius

Item Code: 3177-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 3 flutes, 1 Length of Cut, Carbide, HA Shank, 5 Overall Length, 45° Helix Angle, 0.03 radius

Item Code: 3177-19.050

1/4 Inch Diameter Endmill, 1/4 Shank, 3 flutes, 3/8 Length of Cut, Carbide, HA Shank, 3 Overall Length, 45° Helix Angle, 0.01 radius

Item Code: 3177-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 3 flutes, 7/16 Length of Cut, Carbide, HA Shank, 3 Overall Length, 45° Helix Angle, 0.013 radius

Item Code: 3177-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 3 flutes, 9/16 Length of Cut, Carbide, HA Shank, 3 Overall Length, 45° Helix Angle, 0.015 radius

Item Code: 3177-9.520

8mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 317-8.000

8.1mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 317-8.100

21/64 Inch Diameter, Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 317-8.330

8.5mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 317-8.500

8.7mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 317-8.700

8.8mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 317-8.800

1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, Carbide, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3178-12.700

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, HA Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3178-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3178-19.050

1 Inch Diameter Endmill, 1 Shank, 10 flutes, 1-1/2 Length of Cut, Carbide, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0118 chamfer

Item Code: 3178-25.400