0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 0.7500 in. (3/4) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 31516-C6

0.1875 in. (3/16) Cutter Diameter x 0.5700 in. Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 49612-HARVEY

0.1875 in. (3/16) Cutter Diameter x 1.0000 in. (1) Length of Cut 1 Flute Carbide Square Upcut End Mill

Item Code: 51912-HARVEY

1.3750 in. (1-3/8) Cutter Diameter x 0.1875 in. (3/16) Radius 6 Flute Carbide Full Radius Reduced Shank Keyseat Cutter

Item Code: 32912-HARVEY

0.2400 in. Minimum Bore Diameter x 2.0000 in. (2) Maximum Bore Depth AlTiN Coated Carbide Boring Bar

Item Code: 29240XL-C3

0.2500 in. (1/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide Reduce Shank Corner Radius End Mill

Item Code: 17616-C3

0.0150 in. (1/64) Cutter Diameter x 0.0220 in. Length of Cut x 0.1870 in. (3/16) Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 35415-C4

0.0620 in. (1/16) Cutter Diameter x 0.3120 in. (5/16) Length of Cut 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 31862-C3

0.0150 in. (1/64) Cutter Diameter x 0.1500 in. Length of Cut 3 Flute Carbide Tapered Square End Mill

Item Code: 20615-HARVEY

0.0080 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute Carbide Double Ended Corner Rounding End Mill

Item Code: 46008-HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.0050 in. Radius x 0.0310 in. (1/32) Width x 0.1870 in. (3/16) Neck Length 6 Flute Carbide Corner Radius Stagger Keyseat Cutter

Item Code: 43631

0.0470 in. (3/64) Cutter Diameter x 0.1410 in. Length of Cut 4 Flute Carbide Ball End Mill

Item Code: 74347

0.0625 in. (1/16) Cutter Diameter x 0.1870 in. (3/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 23204-C3

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2810 in. (9/32) Length of Cut 4 Flute Carbide Reduce Shank Corner Radius End Mill

Item Code: 17613

0.1250 in. (1/8) Cutter Diameter x 0.0310 in. (1/32) Width x 0.1870 in. (3/16) Neck Length 6 Flute Carbide Square Keyseat Cutter

Item Code: 22131-HARV