0.0150 in. (1/64) Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.5000 in. (1/2) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 57515

0.0150 in. (1/64) Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 57515-C3

0.0200 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 57520-C3

0.0200 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.5000 in. (1/2) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 57520-HARVEY

0.1250 in. (1/8) Shank Diameter x 0.0050 in. Radius x 40 Deg. Included 1 Flute AlTiN Coated Carbide Radius Engraver

Item Code: 57610-C3

0.1250 in. (1/8) Shank Diameter x 0.0050 in. Radius x 40 Deg. Included 1 Flute Carbide Radius Engraver

Item Code: 57610-HARVEY

0.0050 in. Radius x 0.0300 in. Head Diameter x 0.0620 in. (1/16) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 57705-C3

0.0050 in. Radius x 0.0300 in. Head Diameter x 0.0620 in. (1/16) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 57705-HARVEY

0.0200 in. (.5 mm) Cutter Diameter x 0.0600 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57820-C6

0.0250 in. Cutter Diameter x 0.0750 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57825-C6

0.0300 in. Cutter Diameter x 0.0900 in. Length of Cut 6 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57830-C6

0.0310 in. (1/32) Cutter Diameter x 0.0930 in. (3/32) Length of Cut 6 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57831-C6

0.0500 in. Cutter Diameter x 0.1500 in. Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57850-C6

0.0600 in. Cutter Diameter x 0.1800 in. Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57860-C6

0.0800 in. Cutter Diameter x 0.2400 in. Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57880-C6