0.0720 in. Radius x 0.0460 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 17072-C3

0.1000 in. Radius x 0.0450 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 17100-C3

0.2500 in. (1/4) Shank Diameter x 25 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 18525

0.1250 in. (1/8) Shank Diameter x 25 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 18725-C3

0.1250 in. (1/8) Shank Diameter x 50 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 18750-C3

0.0780 in. (5/64) Cutter Diameter x 0.0390 in. Width x 0.1180 in. Neck Length 2 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 19178-C3

0.1250 in. (1/8) Cutter Diameter x 0.0630 in. Width x 0.5000 in. (1/2) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 19501-C3

0.0160 in. Drill Diameter x 0.2700 in. Flute Length 2 Flute Carbide Miniature Drill

Item Code: 20160-HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Width x 0.1870 in. (3/16) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22115-C3

0.1250 in. (1/8) Cutter Diameter x 0.0620 in. (1/16) Width x 0.1870 in. (3/16) Neck Length 6 Flute Carbide Square Keyseat Cutter

Item Code: 22162

0.0394 in. (1 mm) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 220 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 2281M-C3

0.2500 in. (1/4) Shank Diameter x 90 Deg. Included 2 Flute AlTiN Coated Carbide Marking Cutter

Item Code: 23616-C3

0.0400 in. Cutter Diameter x 0.1200 in. Length of Cut 5 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 24340-C6

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Width x 0.0930 in. (3/32) Neck Length 4 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 26410-C3

0.2500 in. (1/4) Cutter Diameter x 0.1090 in. (7/64) Width x 0.3120 in. (5/16) Neck Length 4 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 29741