0.0930 in. (3/32) Cutter Diameter x 0.0200 in. Width x 0.1410 in. Neck Length 4 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 28220-C3

0.2500 in. (1/4) Cutter Diameter x 0.0500 in. Width x 0.3750 in. (3/8) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22350-C3

0.1562 in. (5/32) Cutter Diameter x 1.0000 in. (1) Length of Cut 4 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 12510-C4

0.0580 in. Radius x 0.1070 in. Pilot Diameter 4 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 68058-C3

0.0930 in. (3/32) Cutter Diameter x 0.0200 in. Radius x 0.1400 in. (9/64) Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 966493

0.2500 in. (1/4) Cutter Diameter x 0.8750 in. (7/8) Flute Length x 2.0000 in. (2) Reach 4 Flute AlTiN Coated Carbide Flat Bottom Counterbore

Item Code: 25516-C3

0.7500 in. (3/4) Cutter Diameter x 0.0300 in. Radius x 0.1870 in. (3/16) Width 10 Flute Carbide Corner Radius Reduced Shank Keyseat Cutter

Item Code: 905260

0.1200 in. Diameter x 0.7500 in. (3/4) Margin Length 4 Flute AlTiN Coated Carbide Miniature Reamer

Item Code: RSB1200-C3

0.0380 in. Drill Diameter x 0.3950 in. Flute Length 2 Flute Carbide Miniature Drill

Item Code: 20280-HARVEY

0.1590 in. Diameter x 0.8750 in. (7/8) Margin Length 4 Flute AlTiN Coated Carbide Miniature Reamer

Item Code: RSB1590-C3

0.1150 in. Head Diameter x 1.0000 in. (1) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Deburring Mill

Item Code: 57110-C3

0.0250 in. Radius x 0.2500 in. (1/4) Pilot Diameter 4 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

Item Code: 44025-C3

0.1180 in. Radius x 0.2500 in. (1/4) Pilot Diameter 4 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

Item Code: 44118-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0040 in. Radius x 0.0160 in. Length of Cut x 0.0620 in. (1/16) Reach 2 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 30620-C6

0.5000 in. (1/2) Cutter Diameter x 1.5000 in. (1-1/2) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 41332-C3