0.5000 in. (1/2) Cutter Diameter x 0.1870 in. (3/16) Width x 0.2500 in. (1/4) Neck Length 8 Flute Carbide Square Deep Keyseat Cutter

Item Code: 71270

0.5000 in. (1/2) Cutter Diameter x 0.0930 in. (3/32) Width x 1.5000 in. (1-1/2) Neck Length 8 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 71550-C3

0.0320 in. Drill Diameter x 0.3950 in. Flute Length 2 Flute AlTiN Coated Carbide Miniature Drill

Item Code: 20255-C3

0.500 mm Cutter Diameter x 0.100 mm Radius x 0.750 mm Length of Cut x 4.000 mm Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 975011-C6

0.5000 in. (1/2) Cutter Diameter x 0.0470 in. (3/64) Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22620-C3

0.1870 in. Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 39712-HARVEY

0.0780 in. (5/64) Cutter Diameter x 0.0100 in. Radius x 0.1180 in. Length of Cut x 0.9400 in. Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 63078-C6

0.0937 in. (3/32) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 90 Deg. Included Mill Style 4 Flute AlTiN Coated Carbide Drill/End Mill

Item Code: 15306-C3

1.0000 in. (1) Cutter Diameter x 0.3750 in. (3/8) Width 12 Flute AlTiN Coated Carbide Square Reduced Shank Keyseat Cutter

Item Code: 55990-C3

0.0900 in. Cutter Diameter x 0.2700 in. Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57890-C6

0.0625 in. (1/16) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 970462

0.0781 in. (5/64) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 970478

0.0937 in. (3/32) Cutter Diameter x 0.5000 in. (1/2) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 970493

0.1250 in. (1/8) Cutter Diameter x 1.0000 in. (1) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 997108

0.1875 in. (3/16) Cutter Diameter x 1.0000 in. (1) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 997112