0.0150 in. (1/64) Cutter Diameter x 0.0220 in. Length of Cut x 0.1870 in. (3/16) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 64815-C6

0.0150 in. (1/64) Cutter Diameter x 0.0450 in. Length of Cut x 0.1870 in. (3/16) Reach 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 992515-C3

0.1562 in. (5/32) Cutter Diameter x 0.2350 in. Length of Cut 4 Flute AlTiN Coated Carbide Reduce Shank Square End Mill

Item Code: 943210-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 56662-C3

0.0394 in. Radius x 0.2500 in. (1/4) Cutter Diameter 4 Flute AlTiN Coated Carbide Concave Radius End Mill

Item Code: 4591M-C3

0.1875 in. (3/16) Cutter Diameter x 0.0550 in. Width x 0.2810 in. (9/32) Neck Length 6 Flute Carbide Square Keyseat Cutter

Item Code: 22255-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.0390 in. Width x 0.1560 in. (5/32) Neck Length 6 Flute Carbide Retaining Ring Keyseat Cutter

Item Code: 23512-HARVEY

0.7500 in. (3/4) Cutter Diameter x 0.1740 in. Width x 0.0000 in. Neck Length 10 Flute Carbide Retaining Ring Keyseat Cutter

Item Code: 23548

0.1875 in. (3/16) Cutter Diameter x 0.0300 in. Radius x 0.6250 in. (5/8) Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 46730-HARVEY

0.1250 in. (1/8) Shank Diameter x 0.0050 in. Radius x 90 Deg. Included 1 Flute AlTiN Coated Carbide Radius Engraver

Item Code: 48410-C3

0.0800 in. Cutter Diameter x 0.2400 in. Length of Cut 2 Flute TiB2 Coated Carbide 45 Deg. Helix Square End Mill

Item Code: 24180-C8

0.0900 in. Cutter Diameter x 0.2700 in. Length of Cut 2 Flute TiB2 Coated Carbide 45 Deg. Helix Ball End Mill

Item Code: 27890-C8

0.1250 in. (1/8) Shank Diameter x 0.0100 in. Radius x 45 Deg. Included 1 Flute AlTiN Coated Carbide Radius Engraver

Item Code: 957910-C3

1.500 mm Drill Diameter x 10.000 mm Flute Length 3 Flute TiB2 Coated Carbide Miniature High Performance Drill

Item Code: BAF0590-C8

0.0620 in. (1/16) Drill Diameter x 0.1860 in. Flute Length 90 Deg. 2 Flute AlTiN Coated Carbide Spot Drill

Item Code: 11462-C3