0.6250 in. (5/8) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut x 100 Deg. Included Mill Style 4 Flute Carbide Drill/End Mill

Item Code: 27440

0.2500 in. (1/4) Cutter Diameter x 0.0300 in. Width x 0.3750 in. (3/8) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22330-C3

1.397 mm Drill Diameter x 9.500 mm Flute Length 2 Flute Amorphous Diamond Coated Carbide Miniature High Performance Drill

Item Code: DDA0550-C4

0.1560 in. (5/32) Radius x 0.6250 in. (5/8) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16110-C3

0.1090 in. (7/64) Radius x 0.0580 in. Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 17109-HARVEY

0.3125 in. (5/16) Cutter Diameter x 0.0250 in. Width x 0.4680 in. (15/32) Neck Length 6 Flute Carbide Square Keyseat Cutter

Item Code: 22407-HARVEY

0.1562 in. (5/32) Cutter Diameter x 0.0050 in. Radius x 0.0820 in. Width x 0.6250 in. (5/8) Neck Length 4 Flute AlTiN Coated Carbide Tip Radius Double Angle Shank Cutter

Item Code: 928710-C3

0.1180 in. (3 mm) Cutter Diameter x 0.1770 in. Length of Cut x 1.4200 in. Reach 3 Flute Carbide Square End Mill

Item Code: 35505-HARVEY

0.4375 in. (7/16) Cutter Diameter x 1.0000 in. (1) Length of Cut x 90 Deg. Included Mill Style 4 Flute Cobalt Drill/End Mill

Item Code: 14328

0.1181 in. (3 mm) Cutter Diameter x 0.0780 in. (5/64) Neck Length x 300 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 98953M-C3

0.0050 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter 2 Flute Carbide Double Ended Corner Rounding End Mill

Item Code: 932205

0.0400 in. Cutter Diameter x 0.0050 in. Radius x 0.1200 in. Length of Cut 4 Flute Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 26340-C4

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Square End Mill

Item Code: 942308-C4

0.1875 in. (3/16) Cutter Diameter x 0.2810 in. (9/32) Length of Cut x 2.2500 in. (2-1/4) Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 35512-C4

0.0390 in. Radius x 0.1070 in. Pilot Diameter 4 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 68039-C3