1/4 Inch Diameter, Extra Length Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 504-6.35

8.5mm Diameter Extra Length Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 503-8.50

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3146-12.70

3/4 Inch Diameter Endmill, 3/4 Shank, 2 flutes, 1-1/2 Length of Cut, Carbide, Bright Finish, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3146-19.05

3/8 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3146-9.52

8.4mm Diameter Screw Machine Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

Item Code: 659-8.40

5mm Diameter Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

Item Code: 657-5.00

21/64 Inch Diameter, Extra Length Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 503-8.33

10.2mm Diameter Jobber Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 549-10.20

3/16 Inch Diameter Endmill, 3/16 Shank, 2 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3160-4.76

8mm Diameter Spot Drill, 2 flutes, HSS, Bright Finish, Straight Shank, 120° Point, Right Hand Cut

Item Code: 556-8.00

M10X1.5 Tap, metric thread, D4/D5, 3 flutes, HSS-E, Bright Finish

Item Code: 803-10.00

#2 Diameter, Jobber Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

Item Code: 652-5.61

#4 Diameter, Jobber Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

Item Code: 652-5.31

#6 Diameter, Jobber Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

Item Code: 652-5.18