3.000 mm Cutter Diameter x 0.200 mm Radius x 4.500 mm Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 985657-C3

0.0600 in. Cutter Diameter x 0.6000 in. Length of Cut 3 Flute Carbide Tapered Ball End Mill

Item Code: 35360

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.1870 in. (3/16) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 913008-C6

0.5000 in. (1/2) Cutter Diameter x 0.1180 in. Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22657-C3

0.5000 in. (1/2) Cutter Diameter x 0.1090 in. (7/64) Width x 2.0000 in. (2) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 925510-C3

0.1500 in. Cutter Diameter x 0.5000 in. (1/2) Length of Cut 3 Flute Carbide Multi-Form 10-32 Thread Milling Cutter

Item Code: 987136

0.1575 in. (4 mm) Cutter Diameter x 0.6250 in. (5/8) Flute Length x 1.2500 in. (1-1/4) Reach 4 Flute Carbide Flat Bottom Counterbore

Item Code: 2554M

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 52916

0.1180 in. (3 mm) Cutter Diameter x 0.0100 in. Radius x 0.1770 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 936905-C3

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 2 Flute Carbide 45 Deg. Helix Square End Mill

Item Code: 935616

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 3 Flute Carbide V-Helix Square End Mill

Item Code: 942316

0.7500 in. (3/4) Cutter Diameter x 0.1440 in. Width 8 Flute AlTiN Coated Carbide Reduced Shank Pointed Double Angle Shank Cutter

Item Code: 27520-C3

0.1250 in. (1/8) Shank Diameter x 0.0050 in. Radius x 60 Deg. Included 2 Flute AlTiN Coated Carbide Marking Cutter

Item Code: 987630-C3

0.0625 in. (1/16) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 970462-C3

0.1090 in. (7/64) Cutter Diameter x 0.3270 in. Length of Cut 5 Flute AlTiN Nano Coated Carbide Square End Mill

Item Code: 916002-C6