0.2500 in. (1/4) Shank Diameter x 60 Deg. Per Side 3 Flute Carbide Flat Doubled-Ended Chamfer Cutter

Item Code: 891060

0.2500 in. (1/4) Shank Diameter x 60 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Doubled-Ended Chamfer Cutter

Item Code: 891060-C3

0.1875 in. (3/16) Shank Diameter x 45 Deg. Per Side 12 RH Teeth 6 LH Teeth Carbide Deburring Chamfer Cutter

Item Code: 891145

0.1875 in. (3/16) Shank Diameter x 45 Deg. Per Side 12 RH Teeth 6 LH Teeth Amorphous Diamond Coated Carbide Deburring Chamfer Cutter

Item Code: 891145-C4

0.3750 in. (3/8) Cutter Diameter x 6 Deg. Included 3 Flute Carbide Pointed Dovetail Cutter

Item Code: 891224

0.5000 in. (1/2) Cutter Diameter x 0.0310 in. (1/32) Width x 0.7500 in. (3/4) Neck Length 10 Flute AlTiN Nano Coated Carbide Square Keyseat Cutter for Hardened Steels

Item Code: 891310-C6

0.5000 in. (1/2) Cutter Diameter x 0.0470 in. (3/64) Width x 0.7500 in. (3/4) Neck Length 10 Flute AlTiN Nano Coated Carbide Square Keyseat Cutter for Hardened Steels

Item Code: 891320-C6

0.5000 in. (1/2) Cutter Diameter x 0.0620 in. (1/16) Width x 0.7500 in. (3/4) Neck Length 10 Flute AlTiN Nano Coated Carbide Square Keyseat Cutter for Hardened Steels

Item Code: 891330-C6

0.5000 in. (1/2) Cutter Diameter x 0.0780 in. (5/64) Width x 0.7500 in. (3/4) Neck Length 10 Flute AlTiN Nano Coated Carbide Square Keyseat Cutter for Hardened Steels

Item Code: 891340-C6

0.5000 in. (1/2) Cutter Diameter x 0.1250 in. (1/8) Width x 0.7500 in. (3/4) Neck Length 10 Flute AlTiN Nano Coated Carbide Square Keyseat Cutter for Hardened Steels

Item Code: 891360-C6

0.5000 in. (1/2) Cutter Diameter x 0.1560 in. (5/32) Width x 0.7500 in. (3/4) Neck Length 10 Flute AlTiN Nano Coated Carbide Square Keyseat Cutter for Hardened Steels

Item Code: 891365-C6

0.5000 in. (1/2) Cutter Diameter x 0.1870 in. (3/16) Width x 0.7500 in. (3/4) Neck Length 10 Flute AlTiN Nano Coated Carbide Square Keyseat Cutter for Hardened Steels

Item Code: 891370-C6

0.1250 in. (1/8) Shank Diameter x 0.0300 in. Radius x 90 Deg. Included 1 Flute Carbide Radius Engraver

Item Code: 891410

0.1250 in. (1/8) Shank Diameter x 0.0300 in. Radius x 90 Deg. Included 1 Flute AlTiN Coated Carbide Radius Engraver

Item Code: 891410-C3

0.0620 in. (1/16) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 891562