3.000 mm Cutter Diameter x 9.000 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 967657-C6

0.1875 in. (3/16) Cutter Diameter x 0.0400 in. Radius x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 34840-C3

0.0130 in. Drill Diameter x 0.2300 in. Flute Length 2 Flute AlTiN Coated Carbide Miniature Drill

Item Code: 20130-C3

0.0157 in. (.4 mm) Drill Diameter x 0.2700 in. Flute Length 2 Flute AlTiN Coated Carbide Miniature Drill

Item Code: 20157-C3

0.0780 in. (5/64) Cutter Diameter x 0.0100 in. Radius x 0.1180 in. Length of Cut x 0.6250 in. (5/8) Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 55078-C3

1.587 mm Drill Diameter x 7.600 mm Flute Length 2 Flute AlTiN Nano Coated Carbide Miniature High Performance Drill

Item Code: CSG0625-C6

0.0600 in. Drill Diameter x 0.1800 in. Flute Length 60 Deg. 2 Flute AlTiN Coated Carbide Spot Drill

Item Code: 932760-C3

0.3750 in. (3/8) Cutter Diameter x 0.0100 in. Radius x 0.1330 in. Width x 0.5000 in. (1/2) Neck Length 6 Flute AlTiN Coated Carbide Tip Radius Double Angle Shank Cutter

Item Code: 46624-C3

0.0312 in. (1/32) Cutter Diameter x 0.1560 in. (5/32) Length of Cut 2 Flute Carbide Square Upcut End Mill

Item Code: 49831-HARVEY

0.0290 in. Cutter Diameter x 0.0430 in. Length of Cut x 0.2320 in. Reach 3 Flute Carbide Square End Mill

Item Code: 34629

0.0310 in. (1/32) Radius x 0.0200 in. (.5 mm) Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 45331

0.0600 in. Cutter Diameter x 0.1800 in. Length of Cut x 0.3120 in. (5/16) Reach 4 Flute Carbide Square End Mill

Item Code: 956860

0.0470 in. (3/64) Cutter Diameter x 0.0050 in. Radius x 0.1410 in. Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 44747-HARVEY

0.1180 in. (3 mm) Cutter Diameter x 0.1770 in. Length of Cut x 0.6250 in. (5/8) Reach 3 Flute Carbide Square End Mill

Item Code: 33305-HARVEY

0.0440 in. Cutter Diameter x 0.2500 in. (1/4) Reach 2 Flute AlTiN Coated Carbide Single Form #0 Thread Milling Cutter

Item Code: 993902-C3