8.8mm Diameter Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-8.800

S Diameter, Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-8.840

8.9mm Diameter Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-8.900

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 30° Helix Angle, 0.015 radius

Item Code: 3088-12.702

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3088-12.704

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 30° Helix Angle, 0.062 radius

Item Code: 3088-12.706

1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.015 radius

Item Code: 3088-3.172

1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3088-3.174

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.015 radius

Item Code: 3088-6.352

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3088-6.354

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.062 radius

Item Code: 3088-6.356

3/8 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.015 radius

Item Code: 3088-9.522

3/8 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3088-9.524

3/8 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.062 radius

Item Code: 3088-9.526

9mm Diameter Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-9.000