2.5mm Diameter Endmill, 2.5mm shank, 3 flutes, 7mm Length of Cut, Carbide, HA Shank, 32mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-2.500

20mm Diameter Endmill, 20mm shank, 3 flutes, 32mm Length of Cut, Carbide, HA Shank, 104mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3307-20.000

3mm Diameter Endmill, 3mm shank, 3 flutes, 7mm Length of Cut, Carbide, HA Shank, 38mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-3.000

3.5mm Diameter Endmill, 3.5mm shank, 3 flutes, 7mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-3.500

4mm Diameter Endmill, 4mm shank, 3 flutes, 8mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-4.000

4.5mm Diameter Endmill, 4.5mm shank, 3 flutes, 8mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-4.500

5mm Diameter Endmill, 5mm shank, 3 flutes, 10mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-5.000

5.5mm Diameter Endmill, 5.5mm shank, 3 flutes, 10mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-5.500

6mm Diameter Endmill, 6mm shank, 3 flutes, 10mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-6.000

6.5mm Diameter Endmill, 6.5mm shank, 3 flutes, 13mm Length of Cut, Carbide, HA Shank, 60mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-6.500

7mm Diameter Endmill, 7mm shank, 3 flutes, 13mm Length of Cut, Carbide, HA Shank, 60mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-7.000

7.5mm Diameter Endmill, 7.5mm shank, 3 flutes, 16mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-7.500

8mm Diameter Endmill, 8mm shank, 3 flutes, 16mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-8.000

8.5mm Diameter Endmill, 8.5mm shank, 3 flutes, 16mm Length of Cut, Carbide, HA Shank, 67mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-8.500

9mm Diameter Endmill, 9mm shank, 3 flutes, 16mm Length of Cut, Carbide, HA Shank, 67mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-9.000