1.200 mm Cutter Diameter x 0.100 mm Radius x 1.800 mm Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 985627-C3

1.400 mm Cutter Diameter x 0.100 mm Radius x 2.100 mm Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 985631-C3

1.500 mm Cutter Diameter x 0.200 mm Radius x 2.200 mm Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 985633-C3

1.600 mm Cutter Diameter x 0.200 mm Radius x 2.400 mm Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 985636-C3

1.800 mm Cutter Diameter x 0.200 mm Radius x 2.700 mm Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 985640-C3

2.000 mm Cutter Diameter x 0.200 mm Radius x 3.000 mm Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 985645-C3

2.500 mm Cutter Diameter x 0.200 mm Radius x 3.700 mm Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 985651-C3

0.1020 in. (2.6 mm) Cutter Diameter x 0.0250 in. Width (TSC) x 0.2810 in. (9/32) Neck Length 4 Flute Carbide Thread Relief Cutter

Item Code: 985707

0.1020 in. (2.6 mm) Cutter Diameter x 0.0250 in. Width (TSC) x 0.2810 in. (9/32) Neck Length 4 Flute AlTiN Coated Carbide Thread Relief Cutter

Item Code: 985707-C3

0.1250 in. (1/8) Cutter Diameter x 0.0290 in. Width x 0.1870 in. (3/16) Neck Length 4 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 985801

0.1250 in. (1/8) Cutter Diameter x 0.0290 in. Width x 0.1870 in. (3/16) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 985801-C3

0.1875 in. (3/16) Cutter Diameter x 0.0440 in. Width x 0.3120 in. (5/16) Neck Length 4 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 985802

0.1875 in. (3/16) Cutter Diameter x 0.0440 in. Width x 0.3120 in. (5/16) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 985802-C3

0.3750 in. (3/8) Cutter Diameter x 0.0580 in. Width x 0.5000 in. (1/2) Neck Length 6 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 985805

0.3750 in. (3/8) Cutter Diameter x 0.0580 in. Width x 0.5000 in. (1/2) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 985805-C3