0.2360 in. Radius x 0.1070 in. Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 17236-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 974316

0.0550 in. (1.4 mm) Drill Diameter x 0.1650 in. Flute Length 140 Deg. 2 Flute Carbide Spot Drill

Item Code: 39855

0.0394 in. (1 mm) Cutter Diameter x 0.1560 in. (5/32) Flute Length x 0.3130 in. Reach 4 Flute AlTiN Coated Carbide Flat Bottom Counterbore

Item Code: 2541M-C3

0.1875 in. (3/16) Cutter Diameter x 0.6250 in. (5/8) Length of Cut x 120 Deg. Included Mill Style 2 Flute AlTiN Coated Carbide Drill/End Mill

Item Code: 985512-C3

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 50645-C3

0.2500 in. (1/4) Cutter Diameter x 2.2500 in. (2-1/4) Neck Length x 220 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 971616-C3

0.2500 in. (1/4) Cutter Diameter x 2.2500 in. (2-1/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 928816-C3

0.3750 in. (3/8) Cutter Diameter x 1.0000 in. (1) Flute Length x 3.0000 in. (3) Reach 4 Flute AlTiN Coated Carbide Flat Bottom Counterbore

Item Code: 25524-C3

0.0100 in. Cutter Diameter x 0.0500 in. Length of Cut x 0.1000 in. Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 10010-HARVEY

0.0250 in. Cutter Diameter x 0.1250 in. (1/8) Length of Cut x 0.2500 in. (1/4) Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 10025-HARVEY

0.0300 in. Cutter Diameter x 0.1500 in. Length of Cut x 0.3000 in. Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 10030-HARVEY

0.0350 in. (.9 mm) Cutter Diameter x 0.1750 in. Length of Cut x 0.3500 in. Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 10035-HARVEY

0.0400 in. Cutter Diameter x 0.2000 in. Length of Cut x 0.4000 in. Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 10040-HARVEY

0.0450 in. Cutter Diameter x 0.2250 in. Length of Cut x 0.4500 in. Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 10045-HARVEY