0.0310 in. (1/32) Cutter Diameter x 0.0100 in. Radius x 0.0470 in. (3/64) Length of Cut x 0.2500 in. (1/4) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 908631-C6

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.1870 in. (3/16) Length of Cut x 1.0000 in. (1) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 908708-C6

0.1000 in. Cutter Diameter x 0.0050 in. Radius x 0.1500 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 908800-C6

0.0600 in. Cutter Diameter x 0.0050 in. Radius x 0.0900 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 908860-C6

0.0620 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.0930 in. (3/32) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 908862-C6

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.1170 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 908878-C6

0.0930 in. (3/32) Cutter Diameter x 0.0050 in. Radius x 0.1400 in. (9/64) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 908893-C6

0.1250 in. (1/8) Cutter Diameter x 0.0050 in. Radius x 0.1870 in. (3/16) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 908908-C6

0.1875 in. (3/16) Cutter Diameter x 0.0050 in. Radius x 0.2850 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 908910-C6

0.2500 in. (1/4) Cutter Diameter x 0.0050 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 908916-C6

0.0625 in. (1/16) Cutter Diameter x 0.3120 in. (5/16) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 909062

0.0625 in. (1/16) Cutter Diameter x 0.3120 in. (5/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 909062-C3

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.0620 in. (1/16) Width x 0.1410 in. Neck Length 4 Flute Carbide Corner Radius Keyseat Cutter

Item Code: 909162

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.0620 in. (1/16) Width x 0.1410 in. Neck Length 4 Flute AlTiN Coated Carbide Corner Radius Keyseat Cutter

Item Code: 909162-C3

0.2500 in. (1/4) Cutter Diameter x 0.0620 in. (1/16) Width x 0.1250 in. (1/8) Neck Length 4 Flute Carbide Square Deep Keyseat Cutter for Non-Ferrous

Item Code: 909262